In order to always have hot water in your house or apartment, it’s time to think about buying a modern quality boiler.
You can choose water heaters ( vedenlaemmittimet ) on the E-ferroli website without having to go to the store – sitting comfortably at the monitor screen, you can study the offers and compare them at your leisure to make a final choice.
How to start the boiler
In order to understand how to use the boiler correctly, you need to start with starting the unit. Here you will find some useful tips:
- it is important to take into account that in case of long breaks in the operation of the device, it may be difficult to turn on the boiler. In addition, you may forget how to properly turn on the water heater, how to turn it off, in what sequence. Therefore, it is worthwhile to write down all the most important things about these issues separately somewhere in a notebook.
- Before turning on the boiler after a long break, it is important to carry out a special treatment, using protective anti-corrosion agents.
- In order to turn on the water heater, first of all, the hot water should be shut off. After that, the cold water tap on the boiler is started – blue circle. The tank is filled with cold water and heated water comes out of the open tap on the boiler.
It remains to wait until there is a steady stream. This will indicate that the air is completely out of the water heater. After that, the equipment is connected to the power supply network, the parameters of the water heating temperature are adjusted and the device is started.
Rules of care
It is important to know how to care for the boiler to all owners of water heaters.
In order to ensure the longevity of the operation of the water heater, it is important to properly care for the unit. And here it is necessary to emphasize some important points:
- It is necessary to properly and regularly clean the boiler – once every one and a half or two years will be quite enough. And this task should be entrusted to experienced professionals.
- It is necessary to clean the TEN and the thermostat – especially if hard water is supplied in the water supply, there are no filters at the inlet. During the procedure of cleaning the TEN is removed mechanically. It is best to use citric acid for this purpose.
- The tank should be cleaned by draining the water from it. Soft water stone is easily washed off with ordinary warm water, for dense formation use a wooden scraper. If the impurities are substantial, in this case you should put the tank in water with vinegar for a while.
It is also important to eliminate odors that are created by water that contains sulfate with bacteria in its composition. In stagnant water there is a rotten sulfur odor due to the release of hydrogen sulfide.
By figuring out how to extend the life of your boiler and cleaning the unit, you will be able to enjoy the availability of hot water even when it is shut off in your home.
Correct operation – useful tips
Proper operation of the boiler will make it safe, convenient and enjoyable to use. Useful recommendations will help to understand how to competently operate such a device:
- It is necessary to drain water from the back pressure valve. It is installed to protect the device from pressure on the walls of the tank, releasing excess water from the water heater.
- The water should be regularly warmed up to the maximum temperature – in this way it will be possible to carry out preventive measures to prevent the growth of bacteria.
- Service will help to extend the life of the water heater.
Proper maintenance of the heater will allow you to enjoy the functionality of a modern water heater without breakdowns for many years.